Our Pipe Sealantes are...
➡ Suitable for metal-metal and plastic-metal threaded connections
➡ Drinking water approval for quality water applications
➡ No dirt with its non-dripping formulation
➡ Keeps its sealing properties against shocks & vibrations long after the application
➡ Drinking water approval for quality water applications
➡ No dirt with its non-dripping formulation
➡ Keeps its sealing properties against shocks & vibrations long after the application
Discover Our Product
100% Leak-proof sealing solution for metal threaded joints
No More Mess
Quick and Fast
Non Dripping
Applıcatıon
1
Apply the adhesive with a 360 turn to leading threads of be male and female fittings.
2
Use in absorbent tissue paper to wipe off excess jointing compound in direction of the thread.
3
Assembly parrts and hold on for 24 hour at 22-24°C to ensure full curing of jointing compound.
4
For disassembly, carefully use the hand tools to remove mating parts from the components.
5
When it is ha rd to dissemble at room temperature, apply Iocal heat until reaching 250°C and disassemble while hot. Then, remove any residual cured adhesive mechanicaIly and clean parts with a proper solvent, acetone.
WRAS Approval
We are proud to announce that Datka Fix Anaerobic Pipe Sealants have been officially approved by WRAS.
This WRAS (Water Regulations Advisory Scheme) approval certifies that our products meet the safety and quality standards for use with drinking water in the United Kingdom.
View WRAS Approval
Usage Areas
➡ Close-fitting metal pipe threads where all kinds of water, oil, grease, and many chemicals pass
➡ Pressure vessels
➡ Air Compressors
➡ Hydraulic systems and tanks
➡ Areas where resistance against vibration is required
➡ Suitable for Type H thick metal thread joints according to THE EN 751-1 Standard.
➡ Pressure vessels
➡ Air Compressors
➡ Hydraulic systems and tanks
➡ Areas where resistance against vibration is required
➡ Suitable for Type H thick metal thread joints according to THE EN 751-1 Standard.